Test G: Personal Security Alarm Does Not Operate From Remote Transmitter
- Turn ignition switch to LOCK position. Press horn pad. If horn sounds, go to next step. If horn does not sound, repair horn. See appropriate wiring diagram in STEERING COLUMN SWITCHES article.
- Press panic button on each remote transmitter. If panic feature operate properly on all remote transmitters, system is okay at this time. If panic feature does not operate from one of the remote transmitters, replace defective remote transmitter battery or transmitter. If panic feature does not operate from all remote transmitters, go to next step.
- Disconnect Remote Anti-Theft Personality (RAP) module harness connector C254. Measure voltage at terminal No. 20 (Dark Blue wire) at RAP module harness connector C254. See Figure . If battery voltage exists, replace RAP module. If battery voltage does not exist, repair power distribution circuit. See appropriate wiring diagram in POWER DISTRIBUTION section in WIRING DIAGRAMS article.