LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1999 >> Explorer 4D Utility, 5.0 P, RWD >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Computer Relearn Procedures >> Contour & Mystique >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

  1. Turn ignition switch to RUN position. Locate programming connector located next to electronic door lock module above glove box. Momentarily connect both terminals on programming connector. Horn will sound to verify program mode has been entered successfully. Press any button on remote transmitter.
  2. Horn will sound again to verify remote transmitter has been programmed successfully. To program additional remote transmitters, press any button on next remote transmitter. Horn will sound again to indicate new transmitters have been programmed. Turn ignition switch to LOCK position. Horn will sound again to confirm program mode has exited.
scientia non olet · About LEMON Manuals