LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Active >> Programming >> Remote Transmitter
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Transmitter

NOTE: Once programming mode has been enter and transmitter button is pressed for the first time, all previously stored transmitter codes will be erased. All transmitters to be used with this system must be programmed at the same time (maximum of 4 transmitters).
  1. Turn ignition on. Access programming connector. Programming connector is next to anti-theft/central locking control module (behind glove box). Using jumper wire, momentarily short the 2 terminals of programming connector together. Horn will sound to confirm program mode has been entered.
  2. Press any button on keyless entry remote transmitter. Horn will sound to confirm that transmitter has been programmed.
  3. Repeat step  2 to program all other transmitter (maximum of 4 transmitters) to be used with this system before exiting programming. To exit programming, turn ignition switch to LOCK position. To confirm programming mode has been exited, horn will sound.