Freeze Frame Data Mode

This mode allows access to emission related data values from specific generic PIDs. These values are immediately stored in continuous memory when an emission related fault occurs. This provides a snapshot of the conditions that were present when the fault occurred. Freeze frame will be stored until PCM memory is erased.

To access FREEZE FRAME PID/DATA MODE, turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:

• Select VEHICLE & ENGINE SELECTION menu.
• Select NEW VEHICLE, YEAR & MODEL.
• Follow operating instructions from scan tool menu.
• Select GENERIC OBD-II FUNCTIONS. Press CONT button if OBD-II monitors are not complete.
• Turn ignition switch to ON position.
• Select FREEZE FRAME PID TESTS.