Accessing Ford Specific OBD-II PIDs

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:

• Turn ignition switch to ON position or start engine and allow to idle.
• Select VEHICLE & ENGINE SELECTION menu.
• Select NEW VEHICLE, YEAR & MODEL.
• Select DIAGNOSTIC DATA LINK.
• Select AFCM-ALTERNATE FUEL CTRL MODULE. (AFCM supports similar DTCs and PIDs as PCM, but have an entirely different meaning).
• Select PID/DATA MONITOR AND RECORD.
• Select PIDs and press trigger on scan tool.
• Press START to begin monitoring. If PID value is not as specified, perform appropriate SYSTEM TEST.