Section 107 (Air Bag Restraint Systems)
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- Component Locations
- System Operation Check
- Air Bag Safety Precautions
- Adjustments
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Diagnostics
- Diagnostic Tests
- Test A: Battery Voltage Out Of Range Or Air Bag Warning Light On Continuously (DTC B1671)
- Test B: Primary Crash Sensor Short To Ground (DTC B1914)
- Test C: Driver Air Bag Circuit Fault (DTC B1915)
- Test D: Passenger Air Bag Circuit Failure (DTC B1920)
- Test E: Left Front Belt & Buckle PRETENSIONER Circuit Short To Ground (DTC B1876)
- Test F: Right Front Belt & Buckle Assembly PRETENSIONER Circuit Short To Ground (DTC B1880)
- Test G: ECS Module Bracket High Resistance Or Incorrect Mounting (DTC B1921)
- Test H: Incorrect Module Configuration (DTC C1415)
- Test I: Driver-Side Air Bag High Resistance Or Open Circuit (DTC B1932)
- Test J: Passenger-Side Air Bag High Resistance Or Open Circuit (DTC B1933)
- Test K: Driver-Side Air Bag Circuit Low Resistance (DTC B1887)
- Test L: Passenger Air Bag Circuit Low Resistance (DTC B1888)
- Test M: Primary Crash Sensor Feed/Return Circuit Open (DTC B1941)
- Test N: Left Front Belt & Buckle Assembly PRETENSIONER Circuit Resistance Out Of Range (DTC B1230)
- Test O: Right Front Belt & Buckle Assembly PRETENSIONER Circuit Resistance Out Of Range (DTC B1232)
- Test P: Air Bag Warning Light Circuit Failure (DTC B1868)
- Test Q: No Communication With ECS Module (DTC B1868)
- Wire Repair
- Torque Specifications
- Wiring Diagrams