Component Testing Procedure
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
POWER SEAT SWITCH, LEFT (14A701) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Forward/Rearward circuit | 7 and 5 | Forward | Closed circuit |
| 3 and 1 | Closed circuit | ||
| 7 and 3 | Rearward | Closed circuit | |
| 5 and 1 | Closed circuit | ||
| Front up/down circuit | 7 and 2 | Up | Closed circuit |
| 6 and 1 | Closed circuit | ||
| 7 and 6 | Down | Closed circuit | |
| 2 and 1 | Closed circuit | ||
| Rear up/Down circuit | 7 and 8 | Up | Closed circuit |
| 4 and 1 | Closed circuit | ||
| 7 and 4 | Down | Closed circuit | |
| 8 and 1 | Closed circuit |