LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (HVAC System - Control Components) >> Removal And Installation >> Climate Control Assembly >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If installing a new climate control assembly (dual-zone EATC module), the new module must be configured for the vehicle. For additional information, refer to MODULE CONFIGURATION .
  1. Remove the center instrument panel register.
  2. Remove the lower center finish panel.
  3. Remove the 2 switch panel screws.
  4. Remove the switch panel.
  5. Disconnect the power point electrical connector.
  6. Remove the 4 audio unit screws.
  7. Disconnect the climate control assembly electrical connector.
  8. Disconnect the antenna cable from the audio unit.
  9. Remove the 4 climate control assembly screws.
  10. Remove the climate control assembly.
  11. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals