Section 1360 (Anti-Lock Brake System)
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Notes
- Principles of Operation
- Inspection and Verification
- Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC C1300 - ABS Hydraulic Pump Motor Circuit Failure
- Pinpoint Test B: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test C: DTC C1296 (LF), DTC C1297 (RF), DTC C1298 (RR), DTC C1299 (LR) - Wheel Speed Sensor Input Signal Missing
- Pinpoint Test D: DTC B1484 - Brake Pedal Input Open Circuit
- Pinpoint Test E: DTC B1676 - Battery Voltage Out Of Range
- Pinpoint Test F: No Communication With The Anti-Lock Brake System (ABS) Module
- Pinpoint Test G: Poor Vehicle Tracking During Anti-Lock Function
- Pinpoint Test H: The Traction Control Is Inoperative/Cannot Be Disabled
- Pinpoint Test I: The Yellow Anti-Lock Brake System (ABS) Warning Indicator Does Not Self-Check
- Pinpoint Test J: The Yellow Anti-Lock Brake System (ABS) Warning Indicator Is Always On
- Pinpoint Test K: DTC C1266 - ABS Valve Power Relay Circuit Failure
- Pinpoint Test L: The Traction Control Switch Indicator Is Always On
- Pinpoint Test M: The Traction Control Disable Switch Indicator Is Never ON
- Anti-Lock Control
- Removal And Installation