LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1366 (Engine System) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the engine front cover and the crankshaft front seal inner lip with clean engine oil.
    Fig 1: Locating Crankshaft Front Seal
    G03881970Courtesy of FORD MOTOR CO.
  2. Use the special tools to install the crankshaft front seal into the engine front cover.
    Fig 2: Installing Crankshaft Front Seal Using Special Tools
    G03919891Courtesy of FORD MOTOR CO.
  3. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
scientia non olet · About LEMON Manuals