Valve Seals: Installation
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Use the special tools to install the valve stem seals.
- Install the valve springs. For additional information, refer to VALVE SPRINGS .
- If equipped with fire suppression system, repower the system.
NOTE:
The valve stem seal must be bottomed on the valve seat.
NOTE:
Make sure that the garter spring is present in the valve stem seal.
WARNING:
If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM
.