Section 1402 (Fire Suppression System)
WARNING: This page is about a different car, the 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Fire Suppression System
- Notes
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Fire Suppression Module (FSM) Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With The Fire Suppression Module
- Pinpoint Test B: DTCs B2900 and P0630 -Incorrect Vehicle Identification
- Pinpoint Test C: DTC B299A - Suppressor Left Circuit Open - Loop #1
- Pinpoint Test D: DTC B29A4 - Suppressor Right Circuit Open - Loop #1
- Pinpoint Test E: DTCs B299F and B29A9 -Suppressor Left/Right Circuit Open - Loop #2
- Pinpoint Test F: DTCs B299B and B29A5 -Suppressor Left/Right Circuit Short to Battery - Loop #1
- Pinpoint Test G: DTCs B299C and B29A6 -Suppressor Left/Right Circuit Short to Ground - Loop #1
- Pinpoint Test H: DTCs B29A1, B29AB, B29A3 and B29AD - Suppressor Left/Right Circuit Short to Ground/Low Resistance-Loop #2
- Pinpoint Test I: DTCs B299E and B29A8 -Suppressor Left/Right Circuit Resistance Low on Squib - Loop #1
- Pinpoint Test J: DTC B2792 - Cross Link Between Firing Loops
- Pinpoint Test K: DTCs B29AF, B29B0, B29B1 and B29B2 - Fire Suppression Manual Switch Failure
- Fire Suppression System
- General Procedures
- Removal And Installation