Component Testing Procedure
WARNING: This page is about a different car, the 2006 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
SEAT ADJUST SWITCH, DRIVER SIDE FRONT - WITHOUT MEMORY COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 7 and 1, 2, 3, 4, 5, 8, 9, 10 | Rest | Closed circuit |
| 11 and 1, 2, 3, 4, 5, 7, 8, 9, 10 | Rest | Open circuit | |
| Front height circuit | 11 and 1 8 and 7 |
Down | Closed circuit |
| 11 and 8 1 and 7 |
Up | Closed circuit | |
| Rear height circuit | 11 and 4 5 and 7 |
Down | Closed circuit |
| 11 and 5 4 and 7 |
Up | Closed circuit | |
| Forward/rearward circuit | 11 and 10 9 and 7 |
Rearward | Closed circuit |
| 11 and 9 10 and 7 |
Forward | Closed circuit | |
| Backrest circuit | 11 and 3 2 and 7 |
Rearward | Closed circuit |
| 11 and 2 3 and 7 |
Forward | Closed circuit |