Speed Dependent Wipers
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Wipers may also be programmed using NGS by changing programmable parameters, see MODULE COMMUNICATIONS NETWORK - BLACKWOOD
article.
- Close both front doors.
- Cycle ignition switch from RUN to LOCK position.
- Remove key and within 30 seconds press and hold washer button.
- Within 2 seconds of pressing washer button, put key in ignition.
- When tone is heard, release washer button. Successful deactivation of speed dependent wipers will be followed by one beep. Successful activation of speed dependent wipers will be followed by 2 beeps.