LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1640 (HVAC Control System) >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

    Five Hundred/Montego 

  1. Remove the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Freestyle 

  3. Remove the 3 lower steering column cover screws.
  4. Remove the lower steering column cover.
  5. Remove the 3 lower steering column shroud screws.
  6. Remove the lower steering column shroud.
  7. Disconnect the in-vehicle temperature sensor electrical connector.
  8. All vehicles 

  9. Remove the in-vehicle temperature sensor.
  10. To install, reverse the removal procedure.