Test B: Set Speed Fluctuates
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition switch is in OFF position. Disengage speed control servo cable from servo. Inspect cable by pulling end of cable and observing throttle movement. If cable is okay, go to next step. Replace cable if broken or binding. See SPEED CONTROL CABLE under REMOVAL & INSTALLATION. Retest system operation.
- Drive vehicle and observe speedometer operation without using speed control. If speedometer needle fluctuates, repair speedometer as necessary. See the appropriate Service Information. If speedometer needle does not fluctuate, replace speed control servo. See SPEED CONTROL SERVO under REMOVAL & INSTALLATION. Retest system operation.