LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (MULTIFUNCTION Electronic Control Modules) >> Removal And Installation >> Driver Door Module (DDM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the 2 driver door module nuts.
  3. Disconnect the 2 electrical connectors and remove the DDM.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals