LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 2026 (Power Steering System) >> Removal And Installation >> Power Steering Control (PSC) Module >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING - HYBRID article.
  2. Remove the battery junction box (BJB) bracket nuts on the strut tower.
    • Position the BJB aside.
  3. Disconnect the power steering control module electrical connectors.
  4. Remove the 2 power steering control module nuts.
    • To install, tighten to 23 Nm (17 lb-ft).
  5. Remove the power steering control module ground cable bolt.
  6. Remove the power steering control module nuts from inside the vehicle.
    • To install, tighten to 23 Nm (17 lb-ft).
  7. Remove the power steering control module.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals