Torque Specifications
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| ABS module screws | 5 | - | 44 |
| Brake caliper-to-hydraulic control unit (HCU) brake tube fittings - vehicles equipped with standard ABS | 18 | 13 | - |
| Brake caliper-to-HCU brake tube fittings - vehicles equipped with roll stability control (RSC) | 28 | 21 | - |
| Charge air cooler (CAC) clamp nuts | 12 | 9 | - |
| Degas bottle bolts | 10 | - | 89 |
| Front wheel speed sensor bolt | 9 | - | 80 |
| HCU bracket-to-inner fender well nuts | 29 | 21 | - |
| HCU-to-HCU bracket bolts - vehicles equipped with standard ABS | 15 | 11 | - |
| HCU-to-HCU bracket bolts - vehicles equipped with RSC | 11 | 8 | - |
| Instrument panel LH knee bolster bolts | 9 | - | 80 |
| Master cylinder primary and secondary brake tube fittings - vehicles equipped with standard ABS | 18 | 13 | - |
| Master cylinder primary and secondary brake tube fittings - vehicles equipped with RSC | 28 | 21 | - |
| Power steering fluid reservoir bracket bolts | 28 | 21 | - |
| Rear wheel speed sensor bolt - vehicles equipped with RSC | 25 | 18 | - |
| Stability control sensor cluster bolts | 6 | - | 53 |
| Steering wheel rotation sensor bolts | 1 | - | 9 |
| Wheel speed sensor harness bolts | 9 | - | 80 |