Speed Control Deactivator Switch: Removal
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
- Remove the deactivator switch.
- Disconnect the electrical connector.
CAUTION:
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.
CAUTION:
Make sure the master cylinder reservoir cap is secure before performing this procedure.
CAUTION:
Do not allow any foreign matter to enter the master cylinder port once the deactivator switch is removed.