Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles with a manual transaxle
- Depress the parking brake pedal.
- Shift the transmission into NEUTRAL (N).
Vehicles with an automatic transaxle
- Remove the selector lever trim ring.
Vehicles with a manual transaxle
- Disengage the gearshift boot trim ring.
All vehicles
- Remove the floor console storage bin.
- Remove the floor console finish panel.
- Disconnect the electrical connectors.
- Remove the 2 screws and the ambient lighting module.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the floor console.