Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the center steering wheel bezel. For additional information, refer to STEERING COLUMN article.
- Remove the cruise control switch and bezel by prying the switch with a suitable tool, such as a flat bladed screw driver, toward the rear of the vehicle.
- Disconnect the electrical connector.
- Remove the screws and the steering wheel controls bezel, if equipped.
- To install, reverse the removal procedure.