LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine System-General Information) >> General Procedures >> Bearing - Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bearing - Inspection

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect bearings for the following defects. Possible causes are shown:
    1. Cratering - fatigue failure.
    2. Spot polishing - incorrect seating.
    3. Imbedded dirt engine oil.
    4. Scratching - dirty engine oil.
    5. Base exposed - poor lubrication.
    6. Both edges worn - journal damaged.
    7. One edge worn - journal tapered or bearing not seated.
    Fig 1: Inspect Bearings For Cratering, Spot Polishing, Scratching
    G03429601Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals