Pressure Bleeding
WARNING: This page is about a different car, the 1999 Mercury Mystique, 1999 Mercury Cougar, 1999 Ford Contour, 1998 Mercury Mystique, and 1998 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Clean dirt from around master cylinder reservoir cap. Disconnect low fluid level warning light switch electrical connector. Remove reservoir cap and fill master cylinder reservoir with clean DOT 3 brake fluid.
- Connect Pressure Bleeder (104-00064) and bleed brake system using manufacturer's instructions. Ensure master cylinder reservoir if filled to MAX position.