Section 455 (Anti-Lock Brake System)
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Notes
- Special Tool(s)
- Material
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With The Anti-Lock Brake System (Abs) Module
- Pinpoint Test B: DTC C1186 - Abs Power Relay Output Open Circuit And B1317 And B1318 - Battery Voltage High/Battery Voltage Low
- Pinpoint Test C: DTCS C1145, C1155, And C1230 - Wheel Speed Sensor Circuit Failure
- Pinpoint Test D: DTCS C1148, C1158, C1229, C1233, C1234 And C1237 - Wheel Speed Sensor Coherency Fault/Signal Incorrect
- Pinpoint Test E: DTCS C1095 And C1096 - Abs Hydraulic Pump Motor Circuit Failure/Open
- Pinpoint Test F: DTC B1485: Brake Pedal Input Circuit Battery Short
- Pinpoint Test G: DTC C1414: Incorrect Module Design Level
- Pinpoint Test H: DTC C1187: Brake Fluid Level Input Circuit Open
- Pinpoint Test I: Check For Correct Anti-Lock Brake System (Abs) Module Operation
- Anti-Lock Control
- Removal And Installation