Steering Wheel Rotation Sensor

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When installing a new steering wheel rotation sensor, the ABS module must be configured (using vehicle as-built data) and calibrated. Follow the diagnostic tool directions for the configuration procedures. For module configuration and calibration, refer to MODULE COMMUNICATIONS NETWORK .

Remove the parts in the order indicated in the following illustration and table.

Fig 1: Removing Steering Wheel Rotation Sensor
Courtesy of FORD MOTOR CO.