LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Oil Pressure Sender >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pressure Sender: Notes

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
  1. Remove the generator. For additional information, refer to GENERATOR .
  2. Remove the accessory drive belt idler pulley. For additional information, refer to ACCESSORY DRIVE BELT, TENSIONER AND PULLEY .
  3. Remove the parts in the order indicated in the following illustration.
    Fig 1: Oil Pressure Sender Parts Removal Sequence
    G03243901Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.