Instrument Cluster
The instrument cluster is on the SCP communication network. It is an analog face cluster with a digital odometer. The instrument cluster displays a variety of information. If one of the bus wires becomes shorted to ground or voltage, or if some but not all termination resistors are lost, communications can continue at a degraded level. Check the SCP circuits 915 (PK/LB) and 914 (TO/OG) between the instrument cluster C220a and the DLC C251. Total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the SCP network, damage to the DLC C251, damage to the instrument cluster C220a, or a problem in the in-line connector. For additional information, refer to INFORMATION, GAUGES & WARNING DEVICES .