LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Engine System-General Information) >> General Procedures >> Sprockets
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedures: Sprockets

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: To avoid the possibility of personal injury or damage to the vehicle, do not operate the engine with the hood open until the fan blade has been examined for possible cracks and separation.
    NOTE: Specifications show the expected minimum or maximum condition. Refer to appropriate ENGINE article for the procedure.
    NOTE: If a component fails to meet the specifications, it is necessary to install a new component or refinish. If the component can be refinished, wear limits are provided as an aid to making a decision. A new component must be installed for any component that fails to meet specifications and cannot be refinished.
  1. Inspect the timing chain/belt and the sprockets.
    • Install new components as necessary. Refer to appropriate ENGINE article for the procedure.
      Fig 1: Inspecting Timing Chain And Sprockets
      G03884998Courtesy of FORD MOTOR CO.