COMPUVALVE Replacement - Bi-Fuel Vehicles Only (00-23-9)

WARNING: This page is about the Contour LX, 2.0 3, which is a different variant/trim than selected.

Publication date: 2000-11-13
Reference number: 00-23-9

COMPUVALVE REPLACEMENT - BI-FUEL VEHICLES ONLY

TECHNICAL SERVICE BULLETIN

Reference Number(s): 00-23-9, Date of Issue: November 13, 2000

APPLICATION

Model(s): Ford: 1996-2000 Contour

1994-2000 F-150, F-250 LD

1995-2000 Econoline

Bulletin No.: 00-23-9

Date: November 13, 2000

CONDITION(S)

DRIVEABILITY - COMPUVALVE REPLACEMENT PROCEDURE - SERVICE TIP - BI-FUEL VEHICLES ONLY

ELECTRICAL - COMPUVALVE REPLACEMENT PROCEDURE - SERVICE TIP - BI-FUEL VEHICLES ONLY ENGINE - COMPUVALVE REPLACEMENT PROCEDURE - SERVICE TIP - BI-FUEL VEHICLES ONLY

ISSUE

Possible electronic damage may occur to the Compuvalve from voltage spikes between the Compuvalve connections when connecting or disconnecting the main Compuvalve harness C4025 (J25 marked on harness). This may result in unnecessary Compuvalve replacement.

ACTION

Follow the Service Procedure noted below when connecting or disconnecting the Compuvalve.

SERVICE PROCEDURE

Refer to the following procedure when connecting or disconnecting the Compuvalve.

Always disconnect the red power connector C4026 (J/P26 marked on harness) BEFORE disconnecting the main Compuvalve harness C4025 (J25 marked on harness).
Reconnect the red power connector C4026 (J/P26 marked on harness) only AFTER reconnecting the main Compuvalve harness C4025 (J25 marked on harness).

WARRANTY INFORMATION

WARRANTY STATUS: Information Only.

OASIS CODES: 203000, 203200, 404000, 603300, 607000