Driver's Door Master Window Switch
- Remove driver's door master window switch. With all switches in NEUTRAL position and lock-out switch in OFF position, continuity should exist between terminals No. 19 and 20. See Fig 1 . Continuity should also exist between terminal No. 13 and all other terminals except terminal No. 19. If continuity is as specified, go to next step. If continuity is not as specified, replace driver's door master window switch.
- Check continuity between specified switch terminals with switch in appropriate position. See DRIVER'S DOOR MASTER WINDOW SWITCH TEST table. If continuity is not as specified, replace driver's door master window switch.
DRIVER'S DOOR MASTER WINDOW SWITCH TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Front Window | ||
| Down | 8 & 13; 10 & 19 | |
| Up | 8 & 19; 10 & 13 | |
| Left Rear Window | ||
| Down | 13 & 17; 15 & 19 | |
| Up | 13 & 15; 17 & 19 | |
| Right Front Window | ||
| Down | 9 & 13; 11 & 19 | |
| Up | 9 & 19; 11 & 13 | |
| Right Rear Window | ||
| Down | 13 & 18; 16 & 19 | |
| Up | 13 & 16; 18 & 19 | |