Airbag Configuration

NOTE:
^ If using the WDS, select Module Configuration and Programming, then follow the screen prompts.
^ Make sure module is listed as supporting airbag configuration in the Module Configuration Index.

1. Select Service Bay Functions on the scan tool.
2. Select the module that contains the airbag configuration. Refer to the Module Configuration Index. Module Configuration Index
3. Select Airbag Configuration on the scan tool.
4. Select either S-Duty (DEFAULT), S-Duty (WITH PBAG & IPAD), S-DUTY (WITH PBAG & NO IPAD)
5. After correctly selecting configuration information except settings and finish routine.