LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls - Remove/Install/Overhaul) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2000 Mercury Sable, 2000 Mercury Mystique, 2000 Mercury Grand Marquis, 2000 Mercury Cougar, and 2000 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove any component necessary to gain access to PCM. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

POWERTRAIN CONTROL MODULE LOCATION

Application Location
Contour, Cougar, LS, Mystique, Sable & Taurus Right Rear Of Engine Compartment, Mounted On Cowl
Continental Right Rear Of Engine Compartment, Under Cowl Cover
Crown Victoria, Grand Marquis & Town Car Behind Master Cylinder
Escort Center Of Instrument Panel, Below Center Console
Focus & Mustang Behind Right Kick Panel