LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Excursion 6.8 S, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft Systems - Passive >> Programming >> Key Programming - Without Using 2 Programmed Keys
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Programming - Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available, but Passive Anti-Theft System (PATS) has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more to be programmed. Number of keys programmed into system can be determined by using scan tool and selecting PATS PID NUMKEYS.

Connect scan tool to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in scan tool. Insert unprogrammed key in ignition switch. Turn ignition switch to RUN position. Perform security access procedure. See KEY PROGRAMMING - SECURITY ACCESS PROCEDURE  . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect scan tool. Key should now be programmed. Try new key to ensure vehicle starts.

scientia non olet · About LEMON Manuals