Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the center steering wheel bezel. For additional information, refer to REMOVAL .
- Remove the cruise control switch and bezel by prying the switch with a suitable tool, such as a flat bladed screw driver, toward the rear of the vehicle.
- Disconnect the electrical connector.
- Remove the screws and the steering wheel controls bezel, if equipped.
- To install, reverse the removal procedure.