Section 1467 (Anti-Lock Brake System - Vehicle Dynamic Systems)
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control - Non-Hybrid
- Special Tool(s)
- Principles of Operation
- ABS Module Configuration
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC B1676
- Pinpoint Test B: DTC C1095
- Pinpoint Test C: DTC C1145 (RF), C1155 (LF), C1165 (RR) or C1175 (LR)
- Pinpoint Test D: DTC C1233 (LF), C1234 (RF), C1235 (RR) or C1236 (LR)
- Pinpoint Test E: DTCs C2777, U0151, U0452 and U1901
- Pinpoint Test F: DTCs B2900 and C1805
- Pinpoint Test G: DTC C1996
- Pinpoint Test H: Traction Control Cannot Be Disabled
- Pinpoint Test I: DTCs C1277 and C1278
- Anti-Lock Control - Hybrid
- Special Tool(s)
- Principles of Operation
- Regenerative Braking
- Conventional Friction Braking
- Brake-By-Wire
- Brake Pedal Feel Simulator and Cut-Off Device
- Active Brake Booster
- Electric Vacuum Pump
- Anti-Lock Control
- Electronic Brake Distribution (EBD)
- AdvanceTrac® with Roll Stability Control (RSC®)
- Stability Control Sensors
- Stability/Traction Control Switch
- ABS Module Calibration (Multi-Calibration Routine)
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test J: DTCs C0020:13 and 71
- Pinpoint Test K: DTCs U3003:16 and 17
- Pinpoint Test L: DTCs C0022:11, 12, 13, 14, 1D and 49
- Pinpoint Test M: DTCs C0021:21, 66 and 77
- Pinpoint Test N: DTC C0031:01; C0034:01; C0037:01 or C003A:01
- Pinpoint Test O: DTC C0030:07; C0031:29, 2F, 64; C0033:07; C0034:29, 2F, 64; C0036:07: C0037:29, 2F, 64; C0039:07; C003A:29, 2F or C003A:64
- Pinpoint Test P: DTCs C0048:11, 12, 64; C1108:11, 12 and 1C
- Pinpoint Test Q: DTCs C100A:62; C100D:21, 22; C100E:21, 22 and C100F:11, 12
- Pinpoint Test R: DTCs C1011:1C, 1F, 67 and C1012:01
- Pinpoint Test S: DTC C101A:1C, 62, 64 or C101B:1C
- Pinpoint Test T: DTCs C101C:01 and 71
- Pinpoint Test U: DTCs C0061:28, 64; C0062:64; C0063:28, 64; C0064:28, 64; U0151:87, 88 and U0452:29
- Pinpoint Test V: DTC U3002:62
- Pinpoint Test W: Traction Control Cannot Be Disabled
- Pinpoint Test X: DTCs C1B00:28, 29 and 64
- Anti-Lock Control - Non-Hybrid
- Removal And Installation