Calibration Procedure

WARNING: This page does not describe the selected car, but rather 120 other vehicles, including the 2002 Saturn Vue, 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, and 2002 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: DO NOT save original rear ride heights. Air suspension module has pre-calibrated values already stored.

Turn ignition off and then on. Exit vehicle, close all doors and allow system to vent vehicle down to kneel height (about 30 seconds). Connect NGS tester to Data Link Connector (DLC). Using NGS tester, select AIR SUSPENSION MODULE. Select "Save Calibration Values (Store Ride Height)" from scan tool menu to calibrate air suspension module. Press "Trigger" to by-pass warning message(s) and save "Initialization". Press "Trigger" to toggle from OFF to ON.