LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Focus ZX3, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Module Communications Network) >> Removal & Installation >> Parking Aid Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln Navigator, 2002 Ford Expedition, 2001 Lincoln Navigator, and 2001 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to LOCK position. Disconnect negative battery cable. Lifting from bottom of right "C" pillar safety belt guide cover, open cover. Remove upper safety belt bolt. Remove safety belt anchor bolt. Remove safety belt retractor bolt. Remove safety belt. Remove right rear door opening weather seal. Using trim stick, remove upper "C" pillar trim panel, then remove lower "C" pillar trim panel
  2. Disconnect Parking Aid Module (PAM) and parking aid speaker connectors. Remove parking aid speaker screws. Remove PAM screws. To install, reverse removal procedure. Tighten safety belt and retractor bolts to 25-33 ft. lbs. (34-45 N.m).