Driver's Power Window Control Switch (2-Door)
Remove power window control switch. See POWER WINDOW CONTROL SWITCH under REMOVAL & INSTALLATION. Check continuity between appropriate terminals at appropriate connector with switch in specified position. See DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (2-DOOR) , DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (4-DOOR) or table. See Figure or Figure . If continuity does not exist as specified, replace switch and retest system operation.
DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (2-DOOR)
| Switch Position | Continuity Between Connector-Terminals No. | |
|---|---|---|
| Neutral | C488-5 & C488-1, C488-4, C488-9 | |
| Left Front | ||
| Up | C488-9 & C488-15 | |
| Down | C488-11 & C488-15 | |
| Right Front | ||
| Up | C488-1 & C488-15, C488-4 & C488-5 | |
| Down | C488-4 & C488-15, C488-1 & C488-5 | |
| One-Touch Down Engaged | C488-15 & C488-11, C488-12 | |