LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive >> Programming >> Key Programming - Without Using 2 Programmed Keys
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Programming - Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available but system has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more to be programmed. The number of programmed key can be determined by accessing instrument cluster PID NUMKEYS with New Generation Star (NGS) or Worldwide Diagnostic System (WDS) tester.

Insert unprogrammed key in ignition and turn ignition switch to RUN position. Connect NGS/WDS tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS/WDS tester. Perform security access procedure. See KEY PROGRAMMING - SECURITY ACCESS PROCEDURE  . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS/WDS tester. Key should now be programmed and be able to start vehicle.

scientia non olet · About LEMON Manuals