LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Installation

  1. Ensure pin slot in ignition switch is in RUN position. Turn lock cylinder to START position and release. This sets lock cylinder and actuator pin in RUN position.
  2. Install ignition switch. Ensure actuator pin engages slot in switch. Connect ignition switch electrical connector. Connect positive battery cable. Connect negative battery cable. Test ignition switch operation. Install steering column shrouds and trim cover.
scientia non olet · About LEMON Manuals