LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive >> Programming >> Key Programming - Using Service Card To Add Extra Keys Or Reprogram If All Keys Are Lost
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Programming - Using Service Card To Add Extra Keys Or Reprogram If All Keys Are Lost

NOTE: This procedure has been updated to include information from Ford factory TSB 99-26-6.
  1. To add an extra key, insert an unprogrammed encoded PATS key in ignition. Insert Ford Service Function (FSF) card VERSION 5.0 or higher into New Generation Star (NGS) or Worldwide Diagnostic System (WDS) tester. Select SERVICE BAY FUNCTIONS then PATS. Enter SECURITY ACCESS which results in a 10 minute delay.
  2. Select IGNITION KEY CODE PROGRAM SELECT. Turn ignition key to run and repeat with all keys to be programmed. Select CANCEL 1 time to return to menu selections. Disconnect NGS/WDS tester and wait 10 seconds. Cycle all new keys in ignition and verify vehicle starts.
  3. If all encoded ignition keys are lost, start with 2 new keys with mechanical cuts matching lock cylinder. Insert Ford Service Function (FSF) card VERSION 5.0 or higher into New Generation Star (NGS) or Worldwide Diagnostic System (WDS) tester. Follow ERASE IGNITION KEY procedure.
scientia non olet · About LEMON Manuals