Transmission Range (Tr) Sensor
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See
COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
Disconnect battery negative cable. Place transmission in Neutral position. Raise vehicle on hoist. Disconnect shift cable at TR sensor, loosen sensor bolts and install TR Sensor Alignment Tool (T97L-70010-A). Tighten bolts to specification. See TORQUE SPECIFICATIONS . Reconnect shift cable, lower vehicle and reconnect negative battery cable.