Keyless Entry Keypad
- Enter 5-digit manufacturer's permanent entry code at keypad. Within 5 seconds of pressing last digit, press 1/2 button on keypad to activate programming mode. Hold 1/2 button for more than 2 seconds to erase all stored customer codes. Doors will lock and unlock to confirm all codes are erased. Existing codes do not need to be erased to program new codes.
- Enter new 5-digit keypad code. To associate new code with personality position No. 1 or 2, press 1/2 button within 7.5 seconds of entering last digit of new code for position No. 1, or 3/4 button for position No. 2. Doors will lock and unlock to confirm new code is programmed. If another code is to be programmed, begin entering code with 7.5 seconds of pressing last button.
- After all new codes are programmed, a new remote transmitter can be programmed within 7.5 seconds of pressing last digit in keypad code. To exit program mode, press keyless entry keypad buttons 7/8 and 9/0 simultaneously, or wait 7.5 seconds for GEM to exit automatically.