Using 2 Programmed Keys
NOTE:
This procedure will only work if 2 or more programmed ignition keys are available or additional keys are needed. If 2 keys are not available, see ERASE ALL KEYS & PROGRAM 2 KEYS
.
- Turn ignition switch from OFF to RUN position. Leave ignition switch in RUN position for 3 seconds. Turn ignition switch to OFF position. Remove key.
- Within 5 seconds of turning ignition switch to OFF position, insert new unprogrammed ignition key into ignition lock cylinder. Turn ignition switch from OFF to RUN position. Leave ignition switch in RUN position for 3 seconds. Turn ignition switch to OFF position. Remove key.
- For additional key, repeat procedure from step 1) .