Erase All Keys & Program 2 Keys
NOTE:
This procedure is used when a customer needs keys programmed into system and does not have 2 programmed ignition keys available, or when programmed ignition keys have been lost and/or ignition switch assembly has been replaced.
- Turn ignition switch from OFF to RUN position. Using New Generation Star (NGS) tester select SECURITY ACCESS PROCEDURE. See SECURITY ACCESS PROCEDURE . After security access procedure has been completed, NGS tester will display new menu. Select IGNITION KEY CODE ERASE.
- Turn ignition switch to OFF position. Disconnect NGS tester. Insert first encoded ignition key into lock cylinder. Turn ignition switch to RUN position for 3 seconds. Turn ignition switch to OFF position. Remove ignition key.
- Within 5 seconds, insert second encoded ignition key into lock cylinder. Turn ignition switch to RUN position for 3 seconds. Turn ignition switch to OFF position. Remove ignition key.