Cold Air Bypass Door Actuator
WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
The cold air bypass door actuator is located on the evaporator core housing. During automatic operation the control module can position the door fully open so that some of the airflow will not pass through the heater core. This will provide for maximum cooling. The door is closed or partially closed during modes other than maximum cooling.
- The cold air bypass door actuator positions the cold air bypass door on command from the DATC module.
- Operation of the cold air bypass door actuator is the same as the air inlet door.