Removal & Installation
Disconnect negative battery cable. Remove any component necessary to gain access to PCM. For PCM location, see PCM LOCATION table. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. On Excursion and Super-Duty Pickup, removal of left fender liner may be necessary to remove PCM connector. To install, reverse removal procedure.
PCM LOCATION
| Model | Location | |
|---|---|---|
| Econoline | Left Rear Of Engine Compartment, Near Master Cylinder | |
| Excursion | Behind Left Side Of Instrument Panel, Near Brake Pedal, Through Bulkhead | |
| Expedition, Explorer, Mountaineer, Navigator, & Ranger | Right Rear Of Engine Compartment, Mounted On Cowl | |
| Pickup | ||
| F150 & F250 Light-Duty | Behind Right Kick Panel, Through Bulkhead | |
| Super-Duty | Behind Left Side Of Instrument Panel, Near Brake Pedal, Through Bulkhead | |
| Villager | Behind Glove Box | |
| Windstar | Right Rear Of Engine Compartment, Mounted On Cowl | |