Component testing procedure
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
SEAT CONTROL SWITCH, DRIVER SIDE FRONT - WITHOUT MEMORY - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks before any other tests | 10 and 1, 2, 3, 4, 5, 6, 7, 8, 9 | Rest | Open circuit |
| 6 and 1, 2, 3, 4, 5, 7, 8, 9 | Rest | Closed circuit | |
| Front height circuit | 10 and 1 7 and 6 |
Up | Closed circuit |
| 10 and 7 1 and 6 |
Down | Closed circuit | |
| Rear height circuit | 10 and 4 5 and 6 |
Up | Closed circuit |
| 10 and 5 4 and 6 |
Down | Closed circuit | |
| Forward/rearward circuit | 10 and 8 9 and 6 |
Rearward | Closed circuit |
| 10 and 9 8 and 6 |
Forward | Closed circuit | |
| Backrest circuit | 10 and 3 2 and 6 |
Rearward | Closed circuit |
| 10 and 2 3 and 6 |
Forward | Closed circuit |