Accelerator Pedal and Bracket: Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Install the accelerator pedal and bracket assembly.
- Install the 3 accelerator pedal and bracket retaining nuts.
- Tighten to 9 Nm (80 lb-in).
- Connect the accelerator pedal motor drive cable connector.
- Connect the accelerator pedal motor electrical connector.
- Connect the accelerator pedal sensor electrical connector.
- Carry out the adjustable pedal indexing procedure. For additional information, refer to GENERAL PROCEDURES article.